Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who have lost the key to their vehicle may be concerned about the expense and inconvenience of adding another one. There is a way to save the expense of making your own key fob.
You'll require a phillips screwdriver with a flat head to do this. Place the flathead screwdriver into the slot located in the middle of the case, and slowly open it.
Cost
Certain used cars come with one key, while most SAABs come with two keys. In this case the owner will need to purchase a new key, which is costly. There are many options to cut costs in this procedure. For instance, if only require a replacement for your key fob case and you want to save money by purchasing an old case from a dealership. But, be aware that these cases do not contain the badge or key for emergency use and are prone to wear out quickly.
It is also necessary to be able to pay for the installation and programming the TWICE module. These costs can quickly mount up especially if there's no spare key.
It is vital to have two keys in your vehicle. This way, if lose your only working key you won't end up with no transportation.
The good news is that adding another key to your Saab 9-3 is not so difficult as it could appear. The only problem with this is that the key needs to be connected to your car's computer. This can be done by a dealer, but it might take a while to schedule an appointment. Luckily, you can find the information you need on the internet to aid you in the procedure.
Installation
The majority of Saab cars built since 1995 feature a unique immobilizer system that uses an electronic key fob to control the car's engine. The system also controls doors' locks as well as the remote functions for the vehicle. It is vital to have an extra key to avoid losing the original key and risking having your vehicle taken. If you lose the only Saab working key, there are a variety of options to replace it without paying for expensive dealer services.
It is necessary to prepare the new keyfob. To do this, use the flathead to open the case. Put the screwdriver into the tiny slot that is located in the center of the case, then gently work the screwdriver. If you're having trouble, try using different angles. Once you've opened your case, you'll be able to remove the electronics and place them in a fresh fob case.
You can begin the process of programming when you have the replacement key and fob. You'll need to connect your Tech2 and follow the instructions for NG 9-3, either with or without a transponder. It is recommended that you make use of a replacement TWICE unit that is already mated to the correct key by using a transponder. This unit is available online. But, you must be sure to use an OEM replacement.
Programming
In general, adding an additional key for Saab 9-3 requires a special tool called Tech 2. Tech 2. It also involves programming the car to recognize the new key. This procedure is more complex than simply copying the metal keys, and it must be done by a professional to prevent damage to the vehicle's electronic system. It is best to get an extra car key as soon as you can. In the event of delay, it could result in higher costs in the future.
You'll also need to replace either the CIM or TWICE modules. It's a mail order process and cannot be get through an aftermarket retailer. The cost of buying a new automobile can be expensive depending on the car model.
The dealer will charge the highest dollar to replace the car computer, but you have another option! S.A. Locksmith & Security can reprogram the EEPROM of your Saab computer and prepare the vehicle for the new key, saving you the cost of a brand-new car computer! This service is quick, easy and affordable. You can save up to 50% off the price the dealer would charge. This is a fantastic solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen was one of the most distinctive vehicles to ever wear the Saab badge. It was a Scandinavian front-drive fighter jet-inspired beast that was both fast and enjoyable to drive. There were many other Saab models followed, but none were as unique.
If saab 9 3 key replacement have a Saab 9-3 vehicle and lose your key fob, you need to replace it as fast as possible. As opposed to the more usual European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a unique key to activate. The replacement process is relatively easy if you've got a spare key, however it can be costly and time-consuming if you don't have an extra.
You can save money if purchase an old key fob replacement and then have it programmed locally by locksmiths. Be cautious when buying used keys from eBay and other online outlets. They might not be genuine and you may end having to pay more in the long run.
The removal of the battery and electronics from the old key fob is a simple process that anyone can do using a small screwdriver. Be careful not to scratch any of the tiny electronic components that are inside the case. You should also be cautious about pouring liquids onto the interior of the case because it could cause damage. Moreover, you should never buy a cloned key from any seller on the aftermarket since they might not be compatible with the CIM of your vehicle.